Energy saving and anti-corrosion refrigeration, heat recovery screw unit

Suitable for temperature rise in electrophoresis production lines, electroplating production lines, oxidation production lines, chemical industries, dormitory buildings, etc.

Using the principle of heat pump, with high energy efficiency and energy-saving operation, it is a substitute for traditional boilers; Water and electricity do not come into direct contact, there is no risk of leakage, low noise, and stable operation.
Intelligent temperature control can be set according to demand, and there is no need for dedicated personnel to be on duty during operation. The evaporator and condenser adopt anti-corrosion design, directly heating or cooling the tank liquid.
Energy saving operation, saving more than 35% energy compared to natural gas boilers.

Technical Parameters

Note:
1. Rated cooling capacity is measured under the following working conditions: 1) Evaporation temperature 10℃ 2) Condensation temperature 40℃; 3) Heat recovery device outlet water temperature 40℃~55℃, fouling coefficient 0.086M°℃/kW.
2. In order to improve the energy efficiency ratio of the unit, the above units are equipped with economizers. If the unit's chilled water outlet temperature is 18 degrees, the cooling capacity will increase by 8% and the power will increase by 2%.
3. The power wiring is national standard copper core wire, and all wiring specifications are for reference only.
4. For technical updates, the above specifications are subject to change without prior notice.
5. If you have special requirements, please state the required specifications before ordering.